Lacquer Furniture
Provides anti-corrosive protection for
steel, aluminium, brass and copper. Not effective on zinc and
galvanized surfaces. The metal should be cleaned of all grease,
dirt, processing soil, salt residues, weld scale, rust and other
residue which is likely to affect the performance of a protective
coating. Apply 1-2 coats of Metal Primer thinly and evenly. Lightly
sand between coats when completely dry. Finish with Bio Enamel
Lacquer, white or coloured.
DRYING: Apply second and subsequent coats only after
previous coat has thoroughly dried. This will take between 24 and
40 hours, and longer with cold or damp weather. Do not be tempted
to apply paint too thickly, as this retards the drying process.
Lightly sand if necessary after the undercoat. Do not use below
+12C and above 80% humidity, in cold damp conditions, when
condensation, rain, dew or frost are likely to occur, or hot days,
direct sunlight or hot surfaces. Provide adequate ventilation
during application and drying. Reaches maximum durability after
8-14 days.
COLOURS: Bio Enamel Lacquer is supplied in white.
Standard full colours are: Green, Blue, Ochre, Yellow, Brown,
Red and Black. All colours.
No comments:
Post a Comment